Power Up the Machine. Pulling on the. local Hilti Store or online at: www. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Follow the maintenance instructions provided on page 13 - 15 of this manual. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). . ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Do not use the power socket on the wet vacuum extractor. Keep all fasteners tight and be sure the power blower is in safe working condition. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. - Report machine damage or faulty operation immediately. To register your warranty online, visit us at • Usando uma chave de. ▷ Remove any adjusting key or wrench before turning the power tool on. máquina e anulará as proteções incluídas. Remove power cord plug from battery pack. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Raise the scrub head to the transport position by stepping on. 1. - Keep power cord away from heated surfaces. ▷ Support panels or any oversized workpiece to minimize the risk. - Do not allow children to play on or around machine.